Connection and commissioning guide for hopecomBox1000-G03 and DRM device

• Related Articles

• How to perform near-end commissioning using the hopeCloud APP

  Purpose: Upon commissioning the 250/350kW inverter, you can perform parameter setting and view operation data through the hopeCloud APP by connecting your smartphone to the inverters local WiFi access point. 1．Download and install "hopeCloud" APP 1.1 ...

• How to handle the issue of inverter not been detected by Datalogger

  1. Purpose： After completing the power plant setup and configuring the Datalogger’s (hopePowerBox/hopeComBox) WiFi network, if the hopeCloud shows that the inverter has not been detected, this document will guide you through the process of checking ...

• Inbedrijfstelling uitvoeren met behulp van de hopeCloud APP (How to perform near-end commissioning using the hopeCloud APP)

  Doel: Bij de inbedrijfstelling van de 250/350 kW omvormer kunt u parameters instellen en bedrijfsgegevens bekijken via de hopeCloud APP door uw smartphone te verbinden met het lokale WiFi- toegangspunt van de omvormer. 1 . Download en installeer de " ...

• hopeCloud 4.0 User Manual

  The latest version of hopeCloud (Photovoltaic Product Monitoring Platform) 4.0 has been released. The user manual is available at this link, and it is divided into the APP and Web versions. We welcome everyone to browse and download! Content 1. ...

• How to unbind the WiFi Dongle in hopeCloud platform

  Purpose: Sometimes you may create a new plant in the hopeCloud platform, you want to unbind the WiFi Dongle from the original power plant and add it in the new power plant, this document can guide you how to unbind the WiFi Dongle in the hopeCloud ...