How to unbind the WiFi Dongle in ShineMonitor platform

How to unbind the WiFi Dongle in ShineMonitor platform


Purpose:

Sometimes you may create a new plant on the ShineMonitor, you want to unbind the WiFi Dongle from the original plant and add it in the new plant, this document can guide you how to unbind the WiFi Dongle.

1.  Unbinding steps:

 1.1 First we need to get the WiFi Dongle P/N,as shown below:



1.2 After logging in the ShnineMonitor platform, click as follows: Background management - Data Logger management - Datalogger list - Enter PN NO.


1.3 After entering PN, Click the search button next to it to find this power station and enter it.


1.4 After entering the power station, click as follows: Device Management - Datalog List - find the WiFi PN, and click Delete icon at position 3 to go through the deletion steps:


1.5 If there are a lot of WiFi Dongles in the power station and it is difficult to find the one you want, you can search for and delete it as shown below:


1.6 Return and query again. At this point, enter the WiFi Dongle PN you just operated on, its belonging power station, owner and administrator are all empty, which means the removal was successful.




    • Related Articles

    • How to unbind the WiFi Dongle in hopeCloud platform

      Purpose: Sometimes you may create a new plant in the hopeCloud platform, you want to unbind the WiFi Dongle from the original power plant and add it in the new power plant, this document can guide you how to unbind the WiFi Dongle in the hopeCloud ...
    • How to do the local firmware update for hopeCloud WiFi Dongle

      Purpose: In order to facilitate on-site installation and commissioning, on-site engineer or customer could use the hopeCloud APP on cell phone to upgrade the firmware for WiFi Dongle. 1. Open hopeCould APP, find Service -> Firmware page, download the ...
    • How to login hopeCloud platform with SmartClient account

      1. Purpose: For the convenience of users, the hopeCloud platform currently fully supports data transfer from the old platform (SmartClient). Users can view the inverter data of both new and old WiFi devices on the hopeCloud platform. 2. Login ...
    • How to set the active power on hopeCloud platform

      Web Version In some regions, customers have to limit the active power due to the requirements of the grid company. For this purpose, Hopewind offers a solution on hopeCloud platform. The inverter needs to be registered on hopecloud and connected to ...
    • How to use weather station on hopeCloud platform

      1. Preparation: Customers can monitor whether data on the hopeCloud platform when using a compatible weather station in combination with a Hopewind datalogger. The followings are required: 1. Hopewind datalogger: hopeComBox1000 or hopePowerBox 2. ...